世界电梯网-为您提供各大电梯品牌配件、维修、装潢、保养的价格、技术及相关资讯

SINUMERIK 810D Powerline/840Di/840D 选件概述

选件 / Opiton 页码 / Page 订货编号 / Order No

3D tool radius compensation / 3 维刀具半径补偿1/24 6FC5 251-0AB13-0AA0

2nd machining channel and full memory configuration to 1.5 MB as package additional 1/4 6FC5 451-0AF03-0AA0NEW

附加软件包: 二个加工通道和全存储器配置，最大到1.5MB

Activation of internal servo drive control 6th axis for interpolation tasks 1/4 6FC5 451-0AF02-0AA0

插补任务第六坐标轴内部伺服驱动控制的激活

Activation of internal servo drive control 6th axis for positioning tasks 1/4 6FC5 451-0AF01-0AA0

定位任务第六坐标轴内部伺服驱动控制的激活

Advanced Position Control / 先行位置控制1/10 6FC5 251-0AF04-0AA0

Advanced Processing 1 / 预先处理1 1/12 6FC5 251-0AF10-0AA0

Advanced Processing 2 / 预先处理2 1/12 6FC5 251-0AF11-0AA0

Analog axis / 模拟进给轴1/8 6FC5 251-0AC06-0AA0

Axis container / 轴容器1/8 6FC5 251-0AE01-0AA0

Axial coupling in machine coordinate system / 机床坐标系中轴向耦合1/12 6FC5 251-0AD11-0AA0

Axis/spindle + channel, additional for NCU 561.4/ 附加轴/ 主轴+ 通道(用于NCU 561.4) 1/2 6FC5 251-0AD08-0AA0

Axis/spindle interpolating,each additional / 每个附加插补进给轴/ 主轴1/4 6FC5 251-0AA03-0AA0

1D/3D in position control cycle (incl. IPO cycle) / 位置控制循环中1D/3D (包括IPO 循环)1) 1/16 6FC5251-0AC05-0AA0NEW

Continue machining on contour(Retrace Support) / 轮廓上连续加工(回程支持) 1/12 6FC5 251-0AE72-0AA0

Contour monitoring by tunnel function / 通过隧道功能进行轮廓监控1/32 6FC5 251-0AB16-0AA0

Cross-mode actions / 交叉模式行动1/16 6FC5 251-0AD04-0AA0

Control unit management / 控制单元管理1/28 6FC5 253-0AE03-0AA0

Cross-NCU setpoint coupling / 交叉NCU 设定值耦合1/4 6FC5 251-0AF02-0AA0

Cycles storage separate from CNC user memory / 与CNC 用户存储器分开的循环保存1/18 6FC5 251-0AF00-0AA0

Evaluation of internaldrive variables / 内部驱动变量的评价1/16 6FC5 251-0AB17-0AA0

Electronic transfer / 电子传送1/14 6FC5 250-0AD05-0AA0

Electronic gear / 电子齿轮1/12 6FC5 251-0AE00-0AA0

Electronic weight compensation / 电子平衡配重补偿1/32 6FC5 255-0AC00-0AA0

Expansion of CNC m emory in 1MB increments / CNC 存储器的扩展，以1MB 的增量方式1/2 6FC5 251-0AD02-0AA0

Extended Stop and Retract / 扩展停止和撤消1/36 6FC5250-0AE01-0AA0

Fast IPO link / 快速IPO(插补)链接1/4 6FC5 251-0AF03-0AA0

Feedforward control, acceleration-dependent / 前向进给控制，与加速度有关1/32 6FC5 250-0AA07-0AA0

Generator mode / 发生器模式1/36 6FC5 255-0AE00-0AA0

Handling transformation package / 处理变换程序包1/12 6FC5 251-0AD07-0AA0

Inclined axis / 倾斜进给轴1/12 6FC5 251-0AB06-0AA0

Interrupt routines with rapid retraction from contour / 由于从轮廓快速返回而中断路径1/16 6FC5 251-0AA00-0AA0

Involute interpolation / 渐开线插补1/12 6FC5 251-0AF01-0AA0

I/O interface via PROFIBUS-DP / 通过PROFIBUS-DP 的输入/ 输出接口1/26 6FC5 252-0AD00-0AA0

Laser switching signal, high-speed / 激光切换信号，高速1/14 6FC5 251-0AE74-0AA0

Limit signals/ cam controller / 限制信号/ 凸轮控制器1/8 6FC5 251-0AB07-0AA0

SINUMERIK 810D Powerline/840Di/840D 选件概述

选件 / Option 页码 / Page 订货编号 / Order No.

链接轴 / Link axis 1/8 6FC5 251-0AD10-0AA0

Machining channel, each additional / 每个附加加工通道1/2 6FC5 251-0AA07-0AA0

Machining channels 4 and axes 13 as package / 附加软件包: 4 个加工通道及13 个进给轴1/4 6FC5 251-0AD01-0AA0

<div align="left">Machining package, 5-axis / 加工程序包，5 个进给轴1/12 6FC5 251-0AA10-0AA0

Master/slave for drives / 驱动器的主/ 从程序1/8 6FC5 251-0AC07-0AA0

Master value coupling and curve table interpolation / 主数值耦合以及曲线表插补1/12 6FC5 251-0AD06-0AA0

Measurement, stage 2 / 测量，第二级1/14 6FC5 250-0AD00-0AA0

Mode group, each additional / 模式组，每个附加组1/2 6FC5 251-0AD00-0AA0

Multi-axis interpolation / 多进给轴插补1/10 6FC5 251-0AA16-0AA0

Multi-channel step sequene programming / 多通道步序编程1/20 6FC5 253-0AF03-0AA0

OA-NCK Compiler cycle / OA-NCK 编程器循环1/16 6FC5 251-0AA20-0AA0NEW

Online ISO dialect interpreter / 在线ISO 方言翻译器1/18 6FC5 253-0AE00-0AA0

Oscillation functions / 振荡功能1/14 6FC5 251-0AB04-0AA0

Operation with tool management / 刀具管理操作1/26 6FC5 251-0AB12-0AA0

Pair of synchronized axes (gantry axes) / 同步轴副 (龙门轴) 1/8 6FC5 255-0AB00-0AA0

Path length monitoring / 路径长度监控1/32 6FC5 251-0AF05-0AA0NEW

Path-velocity-dependent analog output / 与路径速度有关的模拟输出1/14 6FC5 251-0AC04-0AA0

PLC user memory expansion in 64 KB increments / 采用64KB 增量的PLC 用户存储器扩展1/34 6FC5 252-0AA03-0AA0

Polynomial interpolation / 多项式插补1/12 6FC5 251-0AA15-0AA0

Positioning axis/auxiliary spindle,each additional / 定位轴/ 辅助主轴，每个附加件1/4 6FC5 251-0AA04-0AA0

PROFIBUS tool and process monitoring / PROFIBUS 刀具和处理监控1/36 6FC5 251-0AE71-0AA0

Program preprocessing / 程序预先处理1/8 6FC5 251-0AC02-0AA0

<span style="font-size: 7pt">Punching and nibbling functions / 冲孔和冲裁功能1/14 6FC5 251-0AC00-0AA0

Quadrant error compensation, dynamic / 象限误差补偿，动态1/32 6FC5 251-0AB14-0AA0

Sag compensation, multidimensional / 悬垂度补偿，多维1/32 6FC5 251-0AB15-0AA0

Safety Integrated axis/spindle package for additional 13 axes/spindles

用于附加13 个进给轴/ 主轴的安全集成式进给轴/ 主轴程序包1/36 6FC5 250-0AC12-0AA0

Safety Integrated basic function / 安全集成的基本功能1/36 6FC5 250-0AC10-0AA0

Safety Integrated special function, as of 5th axis/spindle / 安全集成的特殊功能，如第五进给轴/ 主轴的一样1/36 6FC5 250-0AC11-0AA0

Spline interpolation for 5 Axis/ 5 轴样条插补1/12 6FC5 251-0AA14-0AA0

Setpoint exchange / 设定值交换1/8 6FC5 251-0AE76-0AA0NEW

Spline-interpolation for 3-axis machining / 用于三轴加工的样条插补1/12 6FC5 251-0AF14-0AA0NEW

Synchronized actions, stage 2 / 同步化动作，第二级1/14 6FC5 251-0AD05-0AA0

Synchronous spindle/polygon turning / 同步化主轴/ 多边形车削1/10 6FC5 255-0AB01-0AA0

Tangential control / 切向控制1/8 6FC5 251-0AB11-0AA0

Temperature compensation / 温度补偿1/32 6FC5 251-0AA13-0AA0

TRANSMIT/peripheral surface transformation / TRANSMIT/ 圆周表面变换1/12 6FC5 251-0AB01-0AA0

Travel to fixed stop / 行程至固定档块1/8 6FC5 255-0AB02-0AA0

SINUMERIK 操作员面板前端带有 PCU/TCU
SINUMERIK 操作员面板前端（OP）和触摸操作员面板（TP）可与 SINUMERIK PCU（工业 PC）或 SINUMERIK 瘦客户机单元 (TCU) 配套使用，采用了大量的创新技术，使用简便。
面板前端的 USB 接口为标准 PC 键盘、鼠标和/或 U 盘提供热插拔功能。并提供有各种规格的显示器以及薄膜键盘或机械式键盘。
以此，SINUMERIK 操作前面板可根据用户要求量身定制。
SINUMERIK PCU
使用 SINUMERIK PCU 和 SINUMERIK 操作员面板前端，可以创造创新的操作员面板。SINUMERIK PCU 安装在 SINUMERIK 操作员面板前端的后部，或者也可以将它们安装在最远距离柜中操作员面板 100 m (328 ft) 的位置。
功能强大的 SINUMERIK PCU 采用了大量创新技术。并内置有通讯接口（以太网、MPI 和 PROFIBUS DP）。
经过互补验证的操作员控制组件，如手持式单元、机床控制面板、按钮式面板、电子手轮、键盘和读卡器，可以与 SINUMERIK PCU/TCU 一起使用。 SINUMERIK TCU
SINUMERIK 瘦客户端单元 (TCU) 允许单独安装操作员面板前端和 SINUMERIK PCU/NCU。为此，用户界面可以复制到一个或多个操作员面板前端，每个操作员面板前端均安装有 SINUMERIK TCU。

凭借 SINUMERIK，西门子使用用于不同领域和技术具有的成本效益解决方案为机床自动化提供统一的系统平台。
SINUMERIK 基于以下理念：单数控系统，多种功能 – 从计算机化的数字控制到驱动器和电机直到完整的控制柜。
凭借久经验证的功能、集成的组件和支持服务满足各个领域的特定要求 – 不论是制造大批量还是小批量的简单或复杂的零件。
西门子一直在为客户争取到最大的利益而努力奋斗。

SINUMERIK 820D sl

MCP 机床控制面板

MCP 802D sl 机床控制面板

MCPA 模块

SINUMERIK OP 08T

SINUMERIK OP 010

SINUMERIK OP 010S

SINUMERIK OP 010C

SINUMERIK OP 012

SINUMERIK OP 015

SINUMERIK OP 015A

SINUMERIK OP 015AT

SINUMERIK TP 015A

SINUMERIK TP 015AT

SINUMERIK </span>直接控制按键模块

SINUMERIK PCU 50.3

瘦客户机单元 (TCU)

SINUMERIK 820D sl
6FC5303-0DM13-1AA1
SINUMERIK 802D SL FULL CNC KEYBOARD MOUNTABLE UNDER DISPLAY; HORIZONTAL FORMAT, IP65; WITH 1.5 M CABLE
6FC5303-0DT12-1AA1
SINUMERIK 802D SL FULL CNC KEYBOARD MOUNTABLE BESIDE DISPLAY; VERTICAL FORMAT, IP65; WITH 1.5 M CABLE
6FC5313-5AG00-0AA1
SINUMERIK COMPACTFLASH CARD 1GB EMPTY
6FC5313-6AG00-0AA0
SINUMERIK COMPACTFLASH CARD 8GB EMPTY
6FC5370-0AA00-1AA0
SINUMERIK 802D SL VERSION T/M VALUE OPERATOR PANEL CNC WITH NC-,PLC-, HMI PART AND DRIVE CONTROL FOR SINAMICS AXES/SPINDLES (3/1) INCL:. LOG BOOK AND TOOLBOX
6FC5370-0AA00-2AA0
SINUMERIK 802D SL VERSION T/M PLUS OPERATOR PANEL CNC COMPLETE WITH NC ,PLC , HMI PART AND DRIVE CONTROL FOR SINAMICS AXES/SPINDLES (4/1 OR 3/2) INCL:. LOG BOOK AND TOOL BOX
6FC5370-0AA00-2BA0
SINUMERIK 802D SL VERSION G/N PLUS OPERATOR PANEL CNC COMPLETE WITH NC-,PLC-, HMI PART AND DRIVE CONTROL FOR SINAMICS INCL. LOGBOOK AND TOOLBOX
6FC5370-0AA00-3AA0
SINUMERIK 802D SL VERSION T/M PRO OPERATOR PANEL CNC COMPLETE WITH NC, PLC, HMI PART AND DRIVE CONTROL FOR SINAMICS AXES/SPINDLES (4/1 OR 3/2) INCL:. LOG BOOK AND TOOL BOX
6FC5370-0AA00-3BA0
SINUMERIK 802D SL VERSION G/N PRO OPERATOR PANEL CNC WITH NC-,PLC-, HMI-PART AND DRIVE CONTROL FOR SINAMICS INCL:. LOG BOOK AND TOOLBOX

6FC5603-0AD00-0AA2

SINUMERIK 802DSL MACHINE CONTROL PANEL VERTICAL; MCP INSTALLATION NEXT TO DISPLAY 24V, FLAT RIBBON CABLE CONNECTI SUITABLE FOR 6FC5611-0CA01-0AA1 (PP72/48)

6FC5303-0AF30-1AA0

SINUMERIK 802D SL MACHINE CONTROL PANEL VERTICAL INSTALLATION NEXT TO DISPLAY; FLAT RIBBON CABLE CONNECTION ONLY VIA MCPA MODULE 6FC5312-0DA01-0AA0

6FC5312-0DA01-0AA0

SINUMERIK 802D SL INTERFACE MODULE ANALOG (1X+-10V) INTERFACE AND CONNECTION FOR MACHINE CONTROL PANEL 802D SL 6FC5303-0AF30-1AA0

MCPA模块

6FC5312-0DA01-0AA0
SINUMERIK 802D SL INTERFACE MODULE ANALOG (1X+-10V) INTERFACE AND CONNECTION FOR MACHINE CONTROL PANEL 802D SL 6FC5303-0AF30-1AA0

要为一台简易的车床装备两个伺服轴 (X, Z) 和一个用于皮带传动的主轴以及附加编码器：

SINUMERIK 802D sl 
SINAMICS S120
电机
MOTION-CONNECT 电缆

目标位置
数量
订货号

SINUMERIK 数控系统

SINUMERIK 802D sl PCU T/M pro
1
6FC5370-0AA00-3AA0

SINUMERIK 802D sl 全数控键盘垂直型
1
6FC5303-0DT12-1AA0

MCP 802D sl 机床控制面板垂直型
1
6FC5303-0AF30-1AA0

MCPA 模块，用于 SINUMERIK 802D sl
1
6FC5312-0DA01-0AA0

PP 72/48 I/O 模块 72 24 ;V 输入，48 24 V 输出，0.25 A
2
6FC5611-0CA01-0AA1

0–4 个测量电路的维修服务合同，国别 1–3
1
6FC8506-2RX01-0AA0

SINAMICS S120 变频调速柜

SINAMICS 调节型电源模块16 kW；内部风冷，包括 DRIVE-CLiQ 电缆
1
6SL3130-7TE21-6AA0

SINAMICS 单电机模块30 A，内部风冷，包括 DRIVE-CLiQ 电缆
1
6SL3120-1TE23-0AA1

SINAMICS 双电机模块5 A/5 A，内部风冷，包括 DRIVE-CLiQ 电缆
1
6SL3120-2TE15-0AA0

SINAMICS 传感器模块 SMC30
1
6SL3055-0AA00-5CA0

高频电抗器 16 kW（如果无需 SINAMICS 电源滤波器）
1
6SN1111-0AA00-0BA1

高频电抗器 16 kW 与 SINAMICS 电源滤波器 16 kW 组合使用
1
6SL3000-0FE21-6AA0

DRIVE-CLiQ 信号电缆IP20/IP20，长度：0.60 m (23.62 in)
1
;6SL3060-4AU00-0AA0

PROFIBUS DP 总线电缆，2 芯
5
6XV1830-0EH10

警示标签
4
6SL3166-3AB00-0AA0

电机
<br /> 1FK7 紧凑型伺服电机，6.0 Nm，3000 rpm；带有 DRIVE-CLiQ 接口
2
1FK7060-5AF71-1DG0

1PH7 异步电机，用于主轴 9 kW，带有 DRIVE-CLiQ 接口
1
1PH7107-2QF02-0CA0

电缆

电源电缆 MOTION-CONNECT 800用于 1FK7 紧凑型电机
2
6FX8002-5CG01-1AH0

信号电缆 MOTION-CONNECT 800用于 1FK7 紧凑型电机
3
6FX8002-2DC10-1AH0

附件

SITOP 功率模块 24 V DC/10 A
1
6EP1434-2BA00

连接器用于 12 Mbit/s 以下的 PROFIBUS，不带编程器接口
3
6ES7972-0BA41 -0XA0

轴编码器带有 TTL，1024 个脉冲
1
6FX2001-2CB02

弹簧圆盘联轴器6 mm/6 mm
1
6FX2001-7KF10

旋转编码器紧固爪
3
6FX2001-7KP01

SINUMERIK 840D sl 提供模块化、开放式、灵活的统一结构，用于操作、编程和可视化。可实现一种适用于所有技术功能的创新系统平台。SINUMERIK 840D sl 集成在 SINAMICS S120 驱动系统中，并由 SIMATIC S7-300 自动化系统加以实现，行程了一个适用于中高档性能范围的整套数字系统。SINUMERIK 840D sl 具有以下特点：
高灵活性
出色的动态响应和精度
最佳地集成到网络中
SINUMERIK 840D sl 具有已经认证的集成式安全功能 SINUMERIK Safety Integrated。因此，在简单、经济和实践基础上，可以极其高效地保护人员和机器。

Benefits
SINUMERIK 840D sl 是用于中等到复杂任务的数字 CNC 系统。
性能和灵活性高，尤其适用于复杂的多轴系统
从操作层到 NC 内核层的开放性
集成可靠的人与机器安全保护功能：SINUMERIK 集成安全
已经验证的操作和编程软件，例如用于生产区域的 ShopMill HMI 或 ShopTurn HMI 和运动控制信息系统产品（MCIS 产品）

NCU 710.2

6FC5371-0AA10-0AA2
SINUMERIK 840D SL CNC-HARDWARE NCU 710.2 MIT PLC 317-2DP USER MEMORY: CNC: 3MB; PLC: 512KB INTERNAL-HEAT-DISSIPATION
6FC5800-0AD00-0YB0
SINUMERIK 840DI SL/840D SL ADDITIONALLY 2 MB CNC USER MEMORY IN NCU SOFTWARE OPTION DELIVERY OF A LICENSE
6FC5800-0AD10-0YB0
SINUMERIK 840DI SL/840D SL ADDITIONALLY 128 KB PLC USER MEMORY SOFTWARE OPTION DELIVERY OF A LICENSE
6FC5800-0AP12-0YB0
SINUMERIK 840D SL ADDITIONAL HMI USER MEMORY ON CF-CARD OF THE NCU SOFTWARE OPTION DELIVERY OF A LICENSE
6FC5840-1XF00-0YB0
SINUMERIK 840D SL CNC SOFTWARE 6-3 WITH HMI-EMBEDDED 6 LANGUAGES (ENG, GER, FR, IT, SP, CH S.) DELIVERY OF A LICENSE
6FC5840-1XG00-0YA0
SINUMERIK 840D SL CNC SOFTWARE 6-3 WITH HMI-EMBEDDED 6 LANGUAGES (ENG, GER, FR, IT, SP, CH SIMP) CURRENT VERSION SW ON CF-CARD WITH LICENSE
6FC5840-1YF00-0YB0
SINUMERIK 840D SL CNC SOFTWARE 6-3 WITH HMI-EMBEDDED 6 LANGUAGES (ENG, GER, FR, IT, SP, CH S.), EXPORT; DELIVERY OF A LICENSE
6FC5840-1YG00-0YA0
SINUMERIK 840D SL CNC SOFTWARE 6-3 WITH HMI-EMBEDDED 6 LANGUAGES (ENG,GER,FR,IT,SP,CH S.);EXPORT CURRENT VERSION SW ON CF-CARD WITH LICENSE
6FC5840-3XC00-0YA8
SINUMERIK 840D SL CNC SOFTWARE 6-3/31-5 WITH HMI-EMBEDDED 6-LANGUAGES (ENG,GER,FR,IT,SP, CH S.), CURRENT VERSION SW ON DVD, WITHOUT LICENSE
6FC5840-3XF00-0YB0
SINUMERIK 840D SL CNC SOFTWARE 31-5 WITH HMI-EMBEDDED 6 ;LANGUAGES (ENG,GER,FR,IT,SP, CH S.), DELIVERY OF A LICENSE

6FC5840-3XG00-0YA0

SINUMERIK 840D SL CNC SOFTWARE 31-5 WITH HMI-EMBEDDED 6 LANGUAGES (ENG.,GER.,FR.,ITAL., SPAN.,CH S.) CURRENT VERSION SW ON CF-CARD WITH LICENSE

6FC5840-3XP00-0YL8

SINUMERIK 840D SL CNC SOFTWARE 6/31 WITH HMI-EMBEDDED 6 LANGUAGES (ENG, GER, FR, IT, SP, CH SIMP) SOFTWARE UPDATE SERVICE ON PAPER

6FC5840-3YC00-0YA8

SINUMERIK 840DE SL CNC SOFTWARE 6-3/31-5 WITH HMI-EMBEDDED 6-LANGUAGES (ENG,GER,FR,IT,SP, CH S.), EXPORT, CURRENT VERSION SW ON DVD, WITHOUT LICENSE

6FC5840-3YF00-0YB0

SINUMERIK 840D SL CNC SOFTWARE 31-5 WITH HMI-EMBEDDED 6 LANGUAGES (ENG,GER,FR,IT,SP, CH S.), EXPORT; DELIVERY OF A LICENSE

6FC5840-3YG00-0YA0

SINUMERIK 840D SL CNC SOFTWARE 31-5 WITH HMI-EMBEDDED 6 LANGUAGES (ENG.,GER.,FR.,ITAL., SPAN.,CH S.) CURRENT VERSION SW ON CF-CARD WITH LICENSE

6FC5840-3YP00-0YL8

SINUMERIK 840DE SL CNC SOFTWARE 6-3/31-5 WITH HMI-EMBEDDED 6 LANGUAGES (ENG,GER,FR,IT,SP,CH S.); EXPORT SOFTWARE UPDATE SERVICE ON PAPER

6FC5841-1XF00-0YB0

SINUMERIK 840D SL CNC-SOFTWARE 6-3 AND SHOPMILL-HMI 6 LANGUAGES (ENG, GER, FR, IT, SP, CH S.) DELIVERY OF A LICENSE

6FC5841-1XG00-0YA0

SINUMERIK 840D SL CNC-SOFTWARE 6-3 AND SHOPMILL-HMI 6 LANGUAGES (ENG, GER, FR, IT, SP, CH SIMP) CURRENT VERSION SW ON CF-CARD AND LICENSE

6FC5841-1YF00-0YB0

SINUMERIK 840D SL CNC-SOFTWARE 6-3 AND SHOPMILL-HMI 6 LANGUAGES (ENG, GER, FR, IT, SP, CH S.) DELIVERY OF A LICENSE

6FC5841-1YG00-0YA0

SINUMERIK 840D SL CNC-SOFTWARE 6-3 AND SHOPMILL-HMI 6 LANGUAGES (ENG,GER,FR,IT,SP,CH S.); EXPORT CURRENT VERSION SW ON CF-CARD AND LICENSE

6FC5841-3XC00-0YA8

SINUMERIK 840D SL CNC-SOFTWARE 6-3/31-5 AND SHOPMILL-HMI 6-LANGUAGES (ENG,GER,FR,IT,SP, CH S.), CURRENT VERSION SW ON DVD, WITHOUT LICENSE

6FC5841-3XF00-0YB0

SINUMERIK 840D SL CNC-SOFTWARE 31-5 AND SHOPMILL-HMI 6 LANGUAGES (ENG, GER, FR, IT, SP, CH S.) DELIVERY OF A LICENSE

6FC5841-3XG00-0YA0

SINUMERIK 840D SL CNC-SOFTWARE 31-5 AND SHOPMILL-HMI 6 LANGUAGES (ENG, GER, FR, IT, SP, CH SIMP) CURRENT VERSION SW ON CF-CARD AND LICENSE

6FC5841-3XP00-0YL8

SINUMERIK 840D SL CNC-SOFTWARE 6/31 AND SHOPMILL-HMI 6 LANGUAGES (ENG, GER, FR, IT, SP, CH SIMP) SOFTWARE UPDATE SERVICE ON PAPER

6FC5841-3YC00-0YA8

SINUMERIK 840DE SL CNC-SOFTWARE 6-3/31-5 AND SHOPMILL-HMI 6-LANGUAGES(ENG,GER,FR,IT,SP, CH SIMP), EXPORT; CURRENT SOFTWARE ON DVD, WITHOUT LICENSE

6FC5841-3YF00-0YB0

SINUMERIK 840D SL CNC-SOFTWARE 31-5 AND SHOPMILL-HMI 6 LANGUAGES (ENG, GER, FR, IT, SP, CH S.) EXPORT; DELIVERY OF A LICENSE

6FC5841-3YG00-0YA0

;SINUMERIK 840D SL CNC-SOFTWARE 31-5 AND SHOPMILL-HMI 6 LANGUAGES (ENG,GER,FR,IT,SP,CH S.);EXPORT CURRENT VERSION SW ON CF-CARD AND LICENSE

6FC5841-3YP00-0YL8

SINUMERIK 840DE SL CNC-SOFTWARE 6/31 AND SHOPMILL-HMI 6 LANGUAGES (ENG,GER,FR,IT,SP,CH S.);EXPORT SOFTWARE UPDATE SERVICE ON PAPER

6FC5842-1XF00-0YB0

SINUMERIK 840D SL CNC-SOFTWARE 6-3 AND SHOPTURN-HMI 6 LANGUAGES (ENG, GER, FR, IT, SP, CH S.) EXPORT; DELIVERY OF A LICENSE

6FC5842-1XG00-0YA0

SINUMERIK 840D SL CNC-SOFTWARE 6-3 AND SHOPTURN-HMI 6 LANGUAGES (ENG, GER, FR, IT, SP, CH SIMP) CURRENT VERSION SW ON CF-CARD AND LICENSE

6FC5840-3YF00-0YB0

SINUMERIK 840D SL CNC SOFTWARE 31-5 WITH HMI-EMBEDDED 6 LANGUAGES (ENG,GER,FR,IT,SP, CH S.), EXPORT; DELIVERY OF A LICENSE

6FC5840-3YG00-0YA0

SINUMERIK 840D SL CNC SOFTWARE 31-5 WITH HMI-EMBEDDED 6 LANGUAGES (ENG.,GER.,FR.,ITAL., SPAN.,CH S.) CURRENT VERSION SW ON CF-CARD WITH LICENSE

6FC5840-3YP00-0YL8

SINUMERIK 840DE SL CNC SOFTWARE 6-3/31-5 WITH HMI-EMBEDDED 6 LANGUAGES (ENG,GER,FR,IT,SP,CH S.); EXPORT SOFTWARE UPDATE SERVICE ON PAPER

6FC5841-1XF00-0YB0

SINUMERIK 840D SL CNC-SOFTWARE 6-3 AND SHOPMILL-HMI 6 LANGUAGES (ENG, GER, FR, IT, SP, CH S.) DELIVERY OF A LICENSE

6FC5841-1XG00-0YA0

SINUMERIK 840D SL CNC-SOFTWARE 6-3 AND SHOPMILL-HMI 6 LANGUAGES (ENG, GER, FR, IT, SP, CH SIMP) CURRENT VERSION SW ON CF-CARD AND LICENSE

6FC5842-3XP00-0YL8

SINUMERIK 840D SL CNC-SOFTWARE 6/31 AND SHOPTURN-HMI 6 LANGUAGES (ENG, GER, FR, IT, SP, CH SIMP) SOFTWARE UPDATE SERVICE ON PAPER

6FC5842-3YC00-0YA8

SINUMERIK 840DE SL CNC-SOFTWARE 6-3/31-5 AND SHOPTURN-HMI 6-LANGUAGES (ENG,GER,FR,IT,SP, CH S.), EXPORT, CURRENT VERSION SW ON DVD, WITHOUT LICENSE

6FC5842-3YF00-0YB0

SINUMERIK 840D SL CNC-SOFTWARE 31-5 AND SHOPTURN-HMI 6 LANGUAGES (ENG, GER, FR, IT, SP, CH S.) EXPORT; DELIVERY OF A LICENSE

6FC5842-3YG00-0YA0

SINUMERIK 840D SL CNC-SOFTWARE 31-5 AND SHOPTURN-HMI 6 LANGUAGES (ENG,GER,FR,IT,SP,CH S.);EXPORT CURRENT VERSION SW ON CF-CARD AND LICENSE

6FC5842-3YP00-0YL8

SINUMERIK 840DE SL CNC-SOFTWARE 6-3/31-5 AND SHOPTURN-HMI 6 LANGUAGES (ENG,GER,FR,IT,SP,CH S.);EXPORT SOFTWARE UPDATE SERVICE ON PAPER

6FC5850-1XF00-0YB0
SINUMERIK 840D SL CNC-SOFTWARE 6-3 WITH SINUMERIK OPERATE 6-LANGUAGES (EN,GER,FR,IT,SP,CH SIMPL), DELIVERY OF ONE LICENSE
6FC5850-1XG00-0YA0
SINUMERIK 840D SL CNC-SOFTWARE 6-3 WITH HMI-SL, 6-LANGUAGES (EN,GER,FR,IT,SP, CH SIMPL), CURRENT SOFTWARE ON CF-CARD WITH LICENSE

6FC5850-1XG20-6YA0
SINUMERIK 840D SL CNC-SOFTWARE 6-3 WITH SINUMERIK OPERATE, 6-LANGUAGES, EN,GER,FR,IT,SP,CH-S SOFTWARE 2.6 HF2 ON CF-CARD WITH LICENSE CERTIFICATION ACCORDING TO IEC61508 HAS BEEN APPLIED FOR BUT NOT YET GRANTED

6FC5850-1YF00-0YB0
SINUMERIK 840DE SL CNC-SOFTWARE 6-3 WITH SINUMERIK OPERATE 6-LANGUAGES (EN,GER,FR,IT,SP,CH SIMPL), EXPORT DELIVERY OF ONE LICENSE
6FC5850-1YG00-0YA0
SINUMERIK 840D SL CNC-SOFTWARE 6-3 WITH HMI-SL, 6-LANGUAGES (EN,GER,FR,IT,SP,CH SIMPL), EXPORT; CURRENT SOFTWARE ON CF-CARD WITH LICENSE

6FC5850-3XC00-0YA8
SINUMERIK 840D SL CNC-SOFTWARE 6-3/31-5 WITH SINUMERIK OPERATE 6-LANGUAGES (EN,GER,FR,IT,SP,CH-S), CURRENT VERSION SW ON DVD, WITHOUT LICENSE
6FC5850-3XC20-6YA8
SINUMERIK 840D SL CNC-SOFTWARE 6-3/31-5 WITH SINUMERIK OPERATE, 6-LANGUAGES (ENG,GER,FR,IT,SP,CH SIMPL), SW 2.4SP2 SW 2.5SP1 HF1 / 2.5 SP2 SW 2.6 HF2 / 2.6 HF4 ON DVD, WITHOUT LICENSE CERTIFICATION ACCORDING TO IEC61508 WILL BE APPLIED FOR BUT NOT YET GRANTED
6FC5850-3XF00-0YB0
SINUMERIK 840D SL CNC-SOFTWARE 31-5 WITH SINUMERIK OPERATE 6-LANGUAGES (EN,GER,FR,IT,SP,CH SIMPL), DELIVERY OF ONE LICENSE
6FC5850-3XG00-0YA0
SINUMERIK 840D SL CNC-SOFTWARE 31-5 MIT HMI-SL, 6-LANGUAGES (EN,GER,FR,IT,SP,CH SIMPL), CURRENT SOFTWARE ON CF-CARD WITH LICENSE

6FC5850-3XG20-6YA0
SINUMERIK 840D SL CNC-SOFTWARE 31-5 WITH SINUMERIK OPERATE, 6-LANGUAGES, EN,GER,FR,IT,SP,CH-S SOFTWARE 2.6 HF2 ON CF-CARD WITH LICENSE CERTIFICATION ACCORDING TO IEC61508 HAS BEEN APPLIED FOR BUT NOT YET

6FC5850-3XP00-0YL8
SINUMERIK 840D SL CNC-SOFTWARE 6-3/31-5 WITH SINUMERIK OPERATE 6-LANGUAGES (EN,GER,FR,IT,SP, CH SIMPL), SOFTWARE UPDATE SERVICE ON PAPER
6FC5850-3YC00-0YA8
SINUMERIK 840DE SL CNC-SOFTWARE 6-3/31-5 WITH SINUMERIK OPERATE 6-LANGUAGES (EN,GER,FR,IT,SP,CH SIMPL), EXPORT,CURRENT VERSION SW ON DVD, WITHOUT LICENSE
6FC5850-3YC20-6YA8
SINUMERIK 840DE SL CNC-SOFTWARE 6-3/31-5 WITH SINUMERIK OPERATE 6-LANGUAGES (ENG,GER,FR,IT,SP,CH SIMPL), EX SW 2.4SP2 SW 2.5SP1 HF1 / 2.5 SP2 SW 2.6 HF2 / 2.6 HF4 ON DVD, WITHOUT LICENSE CERTIFICATION ACCORDING TO IEC61508 WILL BE APPLIED FOR BUT NOT YET GRANTED
6FC5850-3YF00-0YB0
SINUMERIK 840DE SL CNC-SOFTWARE 31-5 WITH SINUMERIK OPERATE 6-LANGUAGES (EN,GER,FR,IT,SP,CH SIMPL), EXPORT DELIVERY OF ONE LICENSE
6FC5850-3YG00-0YA0
SINUMERIK 840D SL CNC-SOFTWARE 31-5 WITH HMI-SL, 6-LANGUAGES (EN,GER,FR,IT,SP,CH SIMPL), EXPORT; CURRENT SOFTWARE ON CF-CARD WITH LICENSE

6FC5850-3YG20-6YA0
SINUMERIK 840DE SL CNC-SOFTWARE 31-5 EXPORT WITH SINUMERIK OPERATE, 6-LANGUAGES, EN,GER,FR,IT,SP,CH-S SOFTWARE 2.6 HF2 ON CF-CARD WITH LICENSE CERTIFICATION ACCORDING TO IEC61508 HAS BEEN APPLIED FOR BUT NOT YET GRANTED
6FC5850-3YP00-0YL8
SINUMERIK 840D SL CNC-SOFTWARE 6-3/31-5 WITH SINUMERIK OPERATE 6-LANGUAGES (EN,GER,FR,IT,SP, CH SIMPL), EXPORT, SOFTWARE UPDATE SERVICE ON PAPER
6SL3040-0NB00-0AA0
SINAMICS NUMERIC CONTROL EXTENSION NX15 EXTENSION DRIVE CONTROL FOR SINUMERIK 840 D SL UP TO 6 AXES
6SL3040-0NC00-0AA0
SINAMICS NUMERIC CONTROL EXTENSION NX10 EXTENSION DRIVE CONTROL FOR SINUMERIK 840 D SL UP TO 3 AXES

NCU 720.2

NCU 720.2 PN

NCU 730.1

NCU 730.2 PN

数控扩展 NX10/NX15

6SL3040-0NB00-0AA0
 SINAMICS NUMERIC CONTROL EXTENSION NX15 EXTENSION DRIVE CONTROL FOR SINUMERIK 840 D SL UP TO 6 AXES
6SL3040-0NC00-0AA0
SINAMICS NUMERIC CONTROL EXTENSION NX10 EXTENSION DRIVE CONTROL FOR SINUMERIK 840 D SL UP TO 3 AXES

COM01.2 模块

6FC5312-0FA01-0AA0
SINUMERIK 840D SL COM01.2 RS232C(V.24) MODULE FOR NCU 7X0.2

编译循环

用于 NCU 的 NCK OA 软件包

SINUMERIK 安全集成 (sl)

6FC5312-0FA01-0AA0
SINUMERIK 840D SL COM01.2 RS232C(V.24) MODULE FOR NCU 7X0.2
SIEMENS 吴生 17:09:16
6FC5211-0BA01-0AA4
SINUMERIK PERIPHERIE ANALOG DRIVE INTERFACE (ADI4) FOR 4 AXES OVER PROFIBUS DP WITH MOTION CONTROL FUNCTIONALITY FIRMWARE 01.04.08
6FC5611-0CA01-0AA1
SINUMERIK I/O MODULE PP 72/48 72 INPUTS 24 V 48 OUTPUTS 24 V, 0.25 A COATING VERSION PP72/48

Page size:10|20|30|50
Loading…

Loading…
(4 items)

产品 ID
6EP5306-5BG00
电缆套件，包括6 M（19 FT 8 IN）扁平电缆和8 IDC 连接器，50针，带线扣，用于用户安装
6EP5406-5AA00
端子排转换器，从50针 IDC 连接器至螺钉型端子，用于1:1连接，无 LED
6ES7972-0BA42-0XA0
SIMATIC DP，总线连接器，用于 PROFIBUS UP，传输速率达 12 Mbit/s，带弯式电缆引出口，15.8 X 54 X 39.5 mm（宽 x 高 x 深），端接电阻器，带隔离功能，无编程器插口
6XV1830-0EH10
SIMATIC NET, PROFIBUS 快速标准电缆 GP, 2 芯, 屏蔽, 为快速安装而特殊设计，最大长度: 1000m, 最小订购数量: 20m, 按米销售

Page size:10|20|30|50
Loading…
Overview
SINUMERIK PP 72/48 I/O 模块连接到 PROFIBUS DP，提供 72 点数字量输入和 48 点数字量输出。用于输入和输出的 3 个插塞式接头为 50 针端子柱，用于连接扁平电缆。端子排转换器用于直接连接配电盘。

Benefits
通过 PROFIBUS DP 进行连接
3 个端子柱，24 点数字量输入和 16点数字量输出，24 VDC，0.25A
带有安装板，安装简便
集成 24 VDC 电源，输入和输出以及 PROFIBUS 之间电气隔离

Integration
SINUMERIK PP 72/48 I/O 模板可用于以下数控系统：
SINUMERIK 802D sl
SINUMERIK 840Di sl
SINUMERIK 840D sl
对于摸块和数字量输出电源（+24 V DC）是必须的。SINUMERIK PP 72/48 I/O 模块连接概述关于应用、配置和电缆延长线等方面的信息，请在“MOTION-CONNECT 连接系统”下查找。

请稍候…

SINUMERIK PP 72/48D PN I/O 模块

6FC5311-0AA00-0AA0

SINUMERIK I/O MODULE PP 72/48D PN 72 I DIGITAL 48 O DIGITAL, DC 24 V, 0,25 A

6FC5311-0AA00-1AA0

;SINUMERIK I/O MODULE PP 72/48D 2/2A PN 72 I DIGITAL 48 O DIGITAL, DC 24 V, 0,25 A ANALOG: 2 I: +/- 10V, +/- 20 MA,PT100 2 O: +/- 10 V, +/- 20 MA

SINUMERIK 840DE sl 的订货举例
批量订货
通过订货号和订货代码订购
授权密钥包含在订货中

订购产品
备注

项目 1：
1 x 6FC5840-3YG10-4YA0-Z
M01+A03+C11
 
SINUMERIK 840DE sl
数控软件 31-5，带有 HMI-Embedded
对于 NCU，
在 CF 卡上
语言：
简体中文，英文，法文，德文，意大利文，西班牙文
出口型
指定软件版本 1.4
单用户授权
采用强制控制移动到固定挡块
3 个附加进给轴/主轴
1 个附加加工通道

项目 1 的说明：

1 x 6FC5840-3YG10-4YA0
SINUMERIK 840DE sl
数控软件 31-5，带有 HMI-Embedded
对于 NCU，
在 CF 卡上
语言：
简体中文，英文，法文，德文，意大利文，西班牙文
出口型
指定软件版本 1.4
单用户授权
-Z
订货代码订货：

M01
采用强制控制移动到固定挡块

A03
3 个附加进给轴/主轴

C11
1 个附加加工通道

单独订货
通过完整的订货号订购
可从因特网获取授权密钥

订购产品
备注

项目 1：
1 x 6FC5840-3YG10-4YA0

SINUMERIK 840DE sl
数控软件 31-5，带有 HMI-Embedded
对于 NCU，
在 CF 卡上
语言：
简体中文，英文，法文，德文，意大利文，西班牙文
出口型
指定软件版本 1.4
单用户授权 

项目 2：
1 x 6FC5800-0AM01-0YB0

采用强制控制移动到固定挡块

项目 3：
3 x 6FC5800-0AA00-0YB0

3 个附加进给轴/主轴

项目 4：
1 x 6FC5800-0AC10-0YB0

1 个附加加工通道

SINUMERIK 840Di sl 是完整的 PC 集成式数控装置，和 SINAMICS S120 驱动系统结合使用。带有开放式架构硬件和软件的控制装置，特别适用于寻求 PLC I/O 领域内分布式自动化解决方案和/或完全 PC 集成控制的客户。

SINUMERIK 840Di sl

6FC5220-0AA31-2AA0 SINUMERIK 840DI/DIE SL CNC-HARDWARE PCU 50.3-C: 1.5GHZ/512MB 24VDC; INCL. MCI2 BOARD WINDOWS XP PROFESSIONAL (WINXP PRO EMBSYS)
6FC5220-0AA33-2AA0
 SINUMERIK 840DI/DIE SL CNC-HARDWARE PCU 50-3.P: 2.0GHZ/1024MB 24VDC; INCL. MCI2 BOARD WINDOWS XP PROFESSIONAL FOR EMBEDDED SYSTEMS (WINXP PRO EMBSYS)
6FC5220-0XA31-2AA0
SINUMERIK 840DI SL PCU 50.3-C + MCI2-BOARD CNC SOFTWARE ON HD WITH LICENSES AND LICENSE KEY
6FC5220-0XA33-2AA0
SINUMERIK ;840DI SL PCU 50.3-P + MCI2-BOARD CNC SOFTWARE ON HD WITH LICENSES AND LICENSE KEY
6FC5220-0YA31-2AA0
SINUMERIK 840DIE SL PCU 50.3-C + ;MCI2-BOARD CNC SOFTWARE EXPORT ON HD WITH LICENSES AND LICENSE KEY
6FC5220-0YA33-2AA0
SINUMERIK 840DIE SL PCU 50.3-P + MCI2-BOARD CNC SOFTWARE EXPORT ON HD WITH LICENSES AND LICENSE KEY
6FC5222-0AA00-0AA1
SINUMERIK 840DI ELECTRICAL MODULE FOR CNC MCI BOARD EXTENSION SLOT OPTION FOR HANDWHEELS WITH DIFFERENTIAL OR TTL OUTPUT
6FC5248-0AF20-2AA0
SINUMERIK 810D/840D MOUNTING BRACKET FOR MOUNTING A PCU, VIDEO LINK RECEIVER OR TCU BEHIND THE OP PANEL FRONT 1 SET = 2 BRACKETS
6FC5820-1XP00-0YB0
SINUMERIK 840DI SL CNC SOFTWARE 6-3 LICENSE SUPPLY WITHOUT DATA CARRIER
6FC5820-1YP00-0YB0
SINUMERIK 840DI SL CNC SOFTWARE 6-3 EXPORT LICENSE SUPPLY WITHOUT DATA CARRIER

6FC5820-3XC10-0YA8

SINUMERIK 840DI SL CNC SOFTWARE 6-3/20-5 SOFTWARE 1.00 ON CD-ROM WITHOUT LICENSE

6FC5820-3XC10-1YA8

SINUMERIK 840DI SL CNC SOFTWARE 6-3/20-5 SOFTWARE 1.01 ON CD-ROM WITHOUT LICENSE

6FC5820-3XP00-0YB0

SINUMERIK 840DI SL CNC SOFTWARE 20-5 LICENSE SUPPLY WITHOUT DATA CARRIER

6FC5820-3XP00-0YL8

SINUMERIK 840DI SL CNC SOFTWARE 6-3/20-5 SOFTWARE UPDATE SERVICE ON PAPER

6FC5820-3YC10-0YA8

SINUMERIK 840DI SL CNC SOFTWARE 6-3/20-5 EXPORT SOFTWARE 1.00 ON CD-ROM WITHOUT LICENSE

6FC5820-3YC10-1YA8

SINUMERIK 840DIE SL CNC SOFTWARE 6-3/20-5 EXPORT SOFTWARE 1.01 ON CD-ROM WITHOUT LICENSE

6FC5820-3YP00-0YB0

SINUMERIK 840DI SL CNC SOFTWARE 20-5 EXPORT LICENSE SUPPLY WITHOUT DATA CARRIER

6FC5820-3YP00-0YL8

SINUMERIK 840DI SL CNC SOFTWARE 6-3/20-5 EXPORT SOFTWARE UPDATE SERVICE ON PAPER

MCI 板卡扩展 - 插槽型

6FC5222-0AA00-0AA1
SINUMERIK 840DI ELECTRICAL MODULE FOR CNC MCI BOARD EXTENSION SLOT OPTION FOR HANDWHEELS WITH DIFFERENTIAL OR TTL OUTPUT

SINUMERIK 840DiE sl 订货举例
批量订货
（从软件版本 1.4 SP2 开始）

通过订货号和订货代码订购
安装在硬件硬盘上的软件按
授权密钥包含在订货中

订购产品
备注

项目 1：
1 × 6FC5220‑0YA31‑2AA0‑Z
L11+Q01+R04+A01+C11

SINUMERIK 840DiE sl 配有出口型数控软件和选件
项目 1 的说明：

6FC5220‑0YA31‑2AA0
SINUMERIK 840DiE sl PCU 50.3-C/1.5 GHz，配有 MCI2 板卡，带出口型数控软件

-Z
随订货代码（选件）

L11
SINUMERIK 840DiE sl
数控软件 6-3，安装在硬盘上

Q01+R04
指定软件版本
软件版本的名称
Q01+R04，对应于版本 1.4 SP2
单用户授权
A01
1 个附加进给轴/主轴

C11
1 个附加加工通道

项目 2：
6FC5248‑0AF20‑2AA0

安装支架
用于将 SINUMERIK PCU，视频链路接收器或 TCU 安装操作员面板后面

单独订货
通过完整的订货号订购（没有订单代码）
由用户将软件安装在硬件上
通过因特网获取授权密钥

订购产品
备注

项目 1：
1 × 6FC5220‑0AA31‑2AA0

SINUMERIK 840Di sl PCU 50.3-C/1.5 GHz，带 MCI2 板卡

项目 2：
1 × 6FC5248‑0AF20‑2AA0

安装支架
用于将 SINUMERIK PCU，视频链路接收器或 TCU 安装操作员面板后面

项目 3
1 × 6FC5820-3YC10-4YA8

SINUMERIK 840DiE sl
光盘上的数控软件 20-5
出口型
指定软件版本 1.4 SP2
无单一授权

项目 4：
1 × 6FC5820-1YP00-0YB0

SINUMERIK 840DiE sl
数控软件 6-3
出口型
无数据载体
单用户授权

项目 5：
1 × 6FC5253-7BX10-5AG0

操作软件 HMI Advanced
光盘中的 PCU 50.3
指定软件版本 7.5
单用户授权

项目 6：
1 × 6FC5800‑0AA00‑0YB0

1 个附加进给轴/主轴
;
项目 7：
1 × 6FC5800‑0AC10‑0YB0

1 个附加加工通道